Oxygen Tubing, Swivel Connectors, Humidifier Bottles, Cannula Cushions, Regulator and Conserver (Yoke) Washers

Salter Labs Oxygen Supply Tubing in 25', 50' and 75'  ( Clear )

Salter Labs standard clear Extension Hose for all Oxygen Systems in 25', 50' and 75'. These Hoses are fluted inside to lower noise and help prevent crushing. The Ideal hose for any Continuous Flow System. Replace every 2-3 Months or if water is present inside the hose.

25' Salter Labs 2025-25 - SKU 19159: $ 2.99 Ea.    QTY:

25' Salter Labs 2025-25-25 Case 25 Ea. - SKU 19045: $ 62.95    QTY:

50' Salter Labs 2050-50 - SKU 19135: $ 4.69 Ea.   QTY:

50' Salter Labs 2050-50-20 Case 20 Ea. - SKU 19036: $ 99.95     QTY:

75' Salter Labs 2075-75 - SKU 19138: $ 7.95 Ea.   QTY:

75' Salter Labs 2075-75-15 Case 15 Ea. - SKU 19044: $ 109.95    QTY:

WestMed Non Curling Cannula Extension Hoses in 50'

The Westmed Extension Hose for all oxygen systems are a soft, non curling (Lays almost Flat-low memory retention) with an easy to see color in any décor. Ideal to reduce the chance of tangles and falls. Fluted for lower noise and helps prevent crushing. The Ideal hose for getting around the house or the yard. Replace every 2-3 Months or if water is present inside the hose.




Salter Labs Swivel Oxygen Tubing Connector

Salter Labs swivels allow your extension hose to twist freely and help reduce curling and knotting. They are also very useful for putting shorter hoses together, so now you can adjust the hose length at will.

Salter Labs Swivel -1220-0 - SKU 19139: $ 4.49 Ea.   QTY:

Salter Labs Swivel - 1220-0-25 Case 25 Ea. - SKU 19039: $ 88.95   QTY:

E-Z Wrap Cannula Ear Cushions by Salter Labs

These cushions guard the back of the ear from any cannula making it more comfortable and help prevent chaffing.
Comes in a Pack of 2 each (1Pair) or Case of 50 Pair.

Salter Labs E-Z Wrap - 1 Pair - SKU 19114:  $ 1.09 Ea.    QTY:

Salter Labs E-Z Wrap Case of 50 Pair - SKU 19014 :  $ 49.95    QTY:

Humidifier Bottle .5 to 5 LPM Model 7600-0 by Salter Labs. Holds 350 cc Distilled Water Recommended

Adds moisture to the flow of oxygen, helps relieve nasal dryness and sores. Refillable, for Flows up to 6 LPM 
We recommend using distilled water only and replace every 3 months.

Salter Labs Humidifier Bottle-7600-0 - SKU 18100:  $ 2.99 Ea.  QTY:

Salter Labs Humidifier Bottle-7600-0-50 Case of 50 Ea. - SKU 18000:  $ 109.95  QTY:

HIGH FLOW Humidifier Bottle 6 to 10 LPM Model 7900-0 by Salter Labs. Holds 350 cc Distilled Water Recommended

For HIGH FLOW systems, adds moisture to the flow of Oxygen, relieves nasal dryness and sores. Refillable, for Flows up to 10 LPM 
We recommend using distilled water only and replace every 3 months.

Salter Labs High Flow - 7900-0 Humidifier Bottle - SKU 18110:  $ 5.39 Ea.  QTY:

Salter Labs High Flow - 7900-0-25 Humidifier Bottle - 7900 Case 25 Ea. - SKU 18113:  $ 119.95   QTY:

Plastic Hose Nipple ( Xmas Tree ) for Oxygen Concentrators or Oxygen Cylinders

Allows direct connection from your Concentrator or Cylinder to a Cannula, Extension Hose or to a CPAP hose fitting.

Xmas Tree Nipple - SKU 18101:  $ 1.49 Ea.  QTY:

Yoke Washer, Brass with Vi-Ton center for all ( CGA870 ) Oxygen Regulators / Conservers

These washers make the seal between your Regulator / Conserver and the post valve on your cylinder. The Vi-ton material is designed for oxygen use and is recommended to be changed Monthly or when leaks are detected. Just pop out the old one from the Regulator / Conserver and insert a new one.

Vi-Ton Yoke Washers - SKU 18103:  $ 1.88 Ea.    QTY:

Plastic Cylinder Wrench for CGA870 Post Valve with handy Chain

For ALL CGA870 post valve systems, keep a few handy at all times, simple to use and very light weight.  Color may vary.

CGA870 Plastic Wrench - SKU 18102:  $ 1.49 Ea.  QTY:

Metal Cylinder Wrench, for CGA540 Valve (Large Cylinders) Heavy Duty

This wrench is made from heavy duty steel and made to handle continuous use.

Steel CGA540 Wrench - SKU 18105:  $ 8.99 Ea.  QTY:

IN-LINE Water Trap Kit by Salter Labs

Stop getting a sudden nose full of water from your system. A simple, solution for collection of excess condensation ( Rain-Out ) when placed in-line with your Oxygen Concentrator. Comes complete with extra hose for easy instillation. Ends detach to remove water collected and repeated use.

Water Trap Kit - SKU 18001:  $ 9.95  Ea.  QTY:

Replacement Connector Hose with Fittings, Curled, HomeFill, Invacare - SKU 31092

Quality Replacement Hose that fits between the Oxygen Concentrator and HomeFill Unit. With a Coiled hose to prevent tripping.
With a 1 year warranty.

HomeFill Connection Hose - SKU 31092  Just: $ 29.95   QTY:

Tri-Med's Oxygen Concentrator Starter Kit. .5 to 6 LPM - SKU 18007
You get everything you need for any .5 to 5 LPM or Most Portable Oxygen Concentrators, at one low price.
Each Kit contains the following:

   6 Ea. Salter Labs 16Soft-7, Ultra Soft Nasal Cannula's,
   1 Ea. Salter Labs 7600 Humidifier Bottle
   1 Ea. Salter Labs 1221 Swivel with Clip ( needed to connect cannula to hose )
   1 Ea. WestMed 25' Extension Hose

   The most popular Complete Kit on the web at a Low Tri-Med Price..

 Oxygen Concentrator Starter Kit .5 to 6 LPM SKU 18007 Just: $ 15.95  QTY:

Tri-Med's Oxygen Concentrator Starter Kit, HIGH FLOW, 6 to 10 LPM - SKU 18009
You get everything you need for any High Flow ( HF ) Oxygen Concentrator, at one low price.
Each Kit contains the following:

   6 Ea. Salter Labs 16Soft-HF-7, Ultra Soft HF Nasal Cannula's
   1 Ea. Salter Labs 7900 HF Humidifier Bottle
   1 Ea. Salter Labs 1221 Swivel with Clip ( needed to connect cannula to hose )
   1 Ea. WestMed Extension Hose 25'

The most popular High Flow Kit on the web at a Low Tri-Med Price.

High Flow Oxygen Concentrator Starter Kit 6 to 10 LPM SKU 18009
 Just: $ 39.95  QTY:

Have Questions? Which Item is Right for Me?
Just Give us a call Toll Free: 1-866-832-4549
OR Contact us using our secure form; Contact Us.
We are here to help you get the oxygen equipment you need at the lowest price possible.